Blog
Discover the best way to use YOLO Shampoo for optimal results!
YOLO is a highly concentrated, pH neutral car shampoo that provides thick foam and excellent lubricity. It removes dirt and grime with ease whilst leaving a sweet shine. This premium shampoo delivers high levels of cleaning ability.
To use YOLO Shampoo effectively, start by gathering all the necessary equipment to ensure a smooth and efficient car washing process…
To start your car wash with YOLO Shampoo, it’s essential to gather all the necessary tools and set up your workspace correctly to ensure the best results. A high-quality bucket is one of the fundamental items you’ll need. For an added layer of protection against scratches, consider using a bucket equipped with a grit guard. This small yet effective accessory sits at the bottom of your bucket, trapping dirt and debris that might come off your wash mitt during rinsing. By keeping these particles below the water you’ll reuse, the grit guard helps minimise the risk of dragging abrasive materials across your car’s paintwork, which could lead to swirl marks or scratches.
Another key tool for this process is a soft microfibre wash mitt. Unlike sponges or old rags, microfibre mitts are specifically designed for automotive use. Their plush fibre lift and trap dirt effectively, reducing the risk of grinding debris against the surface of your car. Additionally, microfibre is gentle on sensitive finishes, making it ideal for maintaining the integrity of your vehicle’s paint and any protective coatings, such as wax or ceramic treatments.
Access to clean water is equally important, as it forms the foundation of the washing process. Clean, fresh water ensures that no unwanted contaminants are introduced during the wash. If possible, use filtered or softened water to reduce mineral content, which can contribute to water spots and streaking during the drying phase. If you’re using a hose, ensure the water pressure is sufficient to help rinse away dirt effectively.
For those seeking an even more efficient cleaning experience, a pressure washer is a highly beneficial addition to your car care arsenal. Pressure washers provide a strong stream of water that can blast away dirt and grime from hard-to-reach areas, such as wheel arches, grilles, and panel seams. They’re particularly useful for the initial pre-rinse, which is vital for loosening stubborn dirt before applying YOLO Shampoo.
Many pressure washers also come with foam cannon attachments, which can be used to apply LMAO Snow Foam, creating a thick layer of foam that clings to the car and lifts dirt off the surface.
Finally, it’s crucial to set up your washing station in a shaded area. Direct sunlight can heat the car’s surface, causing water and shampoo to dry too quickly. This rapid drying often results in water spots and streaks, undermining your efforts to achieve a spotless finish. If natural shade isn’t available, consider washing your car during the cooler parts of the day, such as early morning or late afternoon, or using a portable canopy for coverage.
By taking the time to prepare your tools and create the right environment, you’re setting yourself up for a safe and effective car washing experience with YOLO Shampoo. These small but essential steps ensure your vehicle will look its absolute best while maintaining the quality of its finish over time.
To use YOLO Shampoo effectively, start by gathering all the necessary equipment to ensure a smooth and efficient car washing process. This includes a high-quality bucket, ideally with a grit guard, a soft microfibre wash mitt, and access to clean water. If you have a pressure washer, it’s a great addition for pre-rinsing the vehicle and achieving a thorough clean. Also, ensure you’re working in a shaded area to prevent premature drying, which can lead to water spots.
Begin by giving your car a pre-wash rinse. This step helps remove loose dirt, dust, and debris from the surface of the vehicle, minimising the risk of scratching the paintwork during washing. Use a hose or pressure washer to spray water over the entire car, paying extra attention to areas where dirt and grime tend to accumulate, such as the wheel arches and lower panels. Pre-rinsing not only protects the paint but also prepares the surface for the application of YOLO Shampoo.
Now, prepare the YOLO Shampoo solution. Fill your bucket with clean water and pour in the recommended amount of YOLO Shampoo, following the instructions on the label. The shampoo is designed to create a luxurious, thick foam that lifts dirt while being gentle on your car’s protective coatings, such as wax or ceramic layers. Stir the water gently to mix the shampoo thoroughly and produce a rich lather.
Once your solution is ready, submerge your microfibre wash mitt in the bucket, ensuring it absorbs plenty of suds. Starting from the top of the vehicle and working your way down, wash one panel at a time. The top-down method is crucial because the upper sections of the car are typically cleaner than the lower parts. This minimises the chance of transferring grit from dirtier areas to cleaner sections, which could cause scratches.
As you wash each panel, use light pressure and straight line motions rather than circular scrubbing. Straight line motions reduce the likelihood of swirl marks forming on the paint. Rinse the mitt in your bucket after every panel, using the grit guard if available to release any trapped debris before loading it with fresh suds for the next section. Pay particular attention to crevices and seams where dirt often hides, ensuring you give these areas a thorough clean.
After you’ve washed the entire car, it’s time to rinse off the shampoo. Use your hose or pressure washer to remove all suds, ensuring no residue remains on the paintwork. Take your time during this step, as leftover shampoo can leave streaks or spots once the car dries. Work methodically, rinsing from the top down, just as you did during washing.
YOLO Shampoo
Check out where to find YOLO Shampoo
Additional Information
If you’re looking for an ultra-clean finish, consider using deionised water for the final rinse. This type of water minimises water spots by reducing mineral deposits left behind during drying. However, even with standard tap water, you can achieve excellent results by drying the car promptly.
Drying is a critical step to achieving a streak-free finish and preventing water spots. Use a clean, high-quality microfibre drying towel or a dedicated car dryer. Pat the surface gently or use sweeping motions to absorb water without dragging the towel harshly across the paint. If you’re using a car dryer, direct the air toward seams, badges, and mirrors to push out trapped water.
To complete the process, take a moment to inspect your work. Check for missed spots or streaks and touch them up as needed. YOLO Shampoo is formulated not only to clean but also to enhance the shine of your car, leaving it looking fresh and well-maintained. The shampoo’s advanced formulation includes gloss enhancers, so your vehicle should already appear vibrant and polished.
For best results, pair YOLO Shampoo with other Absolute Sauce products, such as a pre-wash snow foam or a quick detailer for post-wash touch-ups. Regular use of YOLO Shampoo as part of your car care routine will help maintain the pristine appearance of your vehicle while preserving its protective coatings.
For more tips and tricks, or want information on everything Absolute Sauce explore Sauce News and product range at Absolute Sauce.